Android GPS 定位的實現

fmms 12年前發布 | 56K 次閱讀 Android Android開發 移動開發

今天弄了一個多小時,寫了一個GPS獲取地理位置代碼的小例子,包括參考了網上的一些代碼,并且對代碼進行了一些修改,希望對大家的幫助。具體代碼如下:  要實用Adnroid平臺的GPS設備,首先需要添加上權限,所以需要添加如下權限:  

 

<uses-permission android:name="android.permission.ACCESS_FINE_LOCATION"></uses-permission>

 

具體實現代碼如下:

首先判斷GPS模塊是否存在或者是開啟:

private void openGPSSettings() {
        LocationManager alm = (LocationManager) this
                .getSystemService(Context.LOCATION_SERVICE);
        if (alm
                .isProviderEnabled(android.location.LocationManager.GPS_PROVIDER)) {
            Toast.makeText(this, "GPS模塊正常", Toast.LENGTH_SHORT)
                    .show();
            return;
        }

        Toast.makeText(this, "請開啟GPS!", Toast.LENGTH_SHORT).show();
        Intent intent = new Intent(Settings.ACTION_SECURITY_SETTINGS);
        startActivityForResult(intent,0); //此為設置完成后返回到獲取界面

    }

如果開啟正常,則會直接進入到顯示頁面,如果開啟不正常,則會進行到GPS設置頁面:

獲取代碼如下:

private void getLocation()
{
// 獲取位置管理服務
LocationManager locationManager;
String serviceName = Context.LOCATION_SERVICE;
locationManager = (LocationManager) this.getSystemService(serviceName);
// 查找到服務信息
Criteria criteria = new Criteria();
criteria.setAccuracy(Criteria.ACCURACY_FINE); // 高精度
criteria.setAltitudeRequired(false);
criteria.setBearingRequired(false);
criteria.setCostAllowed(true);
criteria.setPowerRequirement(Criteria.POWER_LOW); // 低功耗

String provider = locationManager.getBestProvider(criteria, true); // 獲取GPS信息
Location location = locationManager.getLastKnownLocation(provider); // 通過GPS獲取位置
updateToNewLocation(location);
// 設置監聽器,自動更新的最小時間為間隔N秒(1秒為1*1000,這樣寫主要為了方便)或最小位移變化超過N米
locationManager.requestLocationUpdates(provider, 100 * 1000, 500,
locationListener);
}

到這里就可以獲取到地理位置信息了,但是還是要顯示出來,那么就用下面的方法進行顯示:

private void updateToNewLocation(Location location) {

        TextView tv1;
        tv1 = (TextView) this.findViewById(R.id.tv1);
        if (location != null) {
            double  latitude = location.getLatitude();
            double longitude= location.getLongitude();
            tv1.setText("維度:" +  latitude+ "\n經度" + longitude);
        } else {
            tv1.setText("無法獲取地理信息");
        }

    }
這樣子就能獲取到當前使用者所在的地理位置了,至少如何下地圖上實現,在下面將進行獲取,并顯示出來!對參考代碼的人表示感謝!

轉自:http://www.cnblogs.com/fly_binbin/archive/2010/12/16/1908518.html

 本文由用戶 fmms 自行上傳分享,僅供網友學習交流。所有權歸原作者,若您的權利被侵害,請聯系管理員。
 轉載本站原創文章,請注明出處,并保留原始鏈接、圖片水印。
 本站是一個以用戶分享為主的開源技術平臺,歡迎各類分享!